We learned a lot along the way that I want to share with you to empower you with this DIY, even if you’ve never done it yourself.
Before you begin anything, be sure to prep your walls and the space. These walls haven’t been touched since we built them so we didn’t need to fill any holes or sand down bumps.
– Strippable wallpaper adhesive – Paint tray and paint roller – Blade – Brush – Plastic – Trim guide – Rags for drips and clean up
We did not want to mess this up, so we opted to cut all the panels first and lay them out on our floor.
The first panel is your most important one! This will ensure even application throughout.
To apply each panel, we just rolled the glue right on the wall.
You always want to apply the paper at the top and let gravity do most of the work on its way down.